Skip to content
Borm Go

Bill of materials

Manufacturing process and surcharge groups for your work orders.

Creating a bill of materials, and therefore the settings in the "Bill of materials" tab, is part of the Production add-on for Borm Go. Add the add-on to your subscription to create work orders and store the related settings.

Manufacturing process

Define how edge processing is done in your workshop and use this manufacturing process automatically in all your new work orders. This ensures that cutting dimensions are calculated correctly from the start, without you having to select the manufacturing process again for every work order.

Define the default setting

Every new work order is prefilled with the manufacturing process selected here. It then also applies automatically to all components that are added.

In the "Default setting" field, select the manufacturing process that is used most often in your workshop. You have the following options:

OptionWhen to use it
Thickness-dependent allowance per edgeYour edgebander detects the edge thickness and removes exactly this material thickness before gluing
From surcharge tableThe allowances that you entered in the surcharge table are applied
Fixed allowance per edge (x mm)By default, your edgebander removes x mm of material before gluing an edge
Fixed allowance per side (2 mm)Your CNC machine trims components that have been cut to rough size using a roughing cutter or a similar tool
Then click the blue "Update settings" button.

Note

  • The setting only applies to newly created work orders. Existing work orders and their components keep their manufacturing process.
  • You can change the manufacturing process of an individual work order at any time via in the banner.
  • If you copy a work order, the copy keeps the manufacturing process of the original.
  • If you haven't set anything, "Thickness-dependent allowance per edge" is used.

Surcharge groups

Store recurring allowances centrally and use them automatically in all your projects. This ensures that cutting dimensions are calculated consistently and reliably without you having to enter the values again for every component.

Working with the table

In the surcharge table, you can define the allowances to be considered when calculating the cutting dimensions of different materials. The calculation is always based on the finished dimensions of the component. When creating components for a work order, these allowances can be applied automatically via the relevant manufacturing process. The finished and cutting dimensions are then listed in the associated bill of materials.

Select a row with the material type to which you want to add allowances.

Check how the material is used in the respective column: as a base material, edge or cover.

Click to edit all fields in a row.

Now fill in the columns you need. The table is formatted in millimetres. Regular allowances are entered as positive values. However, it is also possible to enter negative values.

Then click the blue "Save changes" button.

Using the table values in a bill of materials

As described above under Manufacturing process, you can select your surcharge table as the manufacturing process in the company basics or directly in the work order. Your table values will then be used to calculate the cutting dimensions of the materials from the finished dimensions of a component.

Note

If you change the values in the surcharge table, your previously created components will keep their original allowances. The new values are used for every component you add from now on.

If you change the manufacturing process of a component afterwards, check the length, width and thickness allowances again.

The following example shows how the allowances in the table affect the cutting dimensions stored in the bill of materials:

You want to fit a chipboard panel with solid wood edges around, with the top and bottom edges running through, and then cover the panel with veneer. The finished dimensions are 500 x 700 mm. In the surcharge table, you enter the following:

Surcharge tableLength (mm)Width (mm)Thickness (mm)
Solid wood as edge102not specified¹
Veneer as cover1020not specified

¹ It is best to enter the thickness of the solid wood edge directly in the "Thickness" field when creating the component. In this example, it is 5 mm.

These dimensions will then appear in your bill of materials:

Length (mm)Width (mm)Thickness (mm)
Finished dimensions
Component50070020.80
Cutting dimensions
Chipboard (raw)49069019
Edge left/right500215
Edge top/bottom710215
Cover top/bottom5107200.90

On this page